How to use the guide

With the quick installation guide for the electronic panels Elentek you can easily find the wiring diagram suitable for your specific needs.
You can answer the four questions of the Guided Search, or choose to proceed with the Advanced Search and view all configurations on screen at once, then filter them through the dropdown menu.

Guided search

The guided search is designed to lead you to the correct wiring diagram through four simple questions:

Which Elentek panel do you own?

Elentek offers a wide range of panels, but difficulties during installation often arise with the electronic line. Choose from the list the panel you own.

What do you need it for?

Here you need to think about the use of your hydraulic system. Do you need it to fill a tank or a cistern? Or have you decided to create a drainage, emptying, or lifting system to move excess water into the sewer system? Or do you need it to bring water to the upper floors of your home or irrigate fields with a pressurization system? Choose wisely: different applications require different accessories.

What is your system made of?

Do you need to manage one or two pumps? More pumps means more connections

What accessories do you have?

Each application requires the use of different accessories, but the available space also determines the type of sensors to use. Choose from the list if you have floats, minimum probes, pressure switches, or if you do not have any of these elements.

Advanced search

The advanced search allows you to immediately view all types of systems on a single page, and then filter them using the dropdown filters.

Why can advanced search be useful?

Sometimes it's better to see an illustration to quickly understand the type of your system. The filters will help you gradually narrow down the choices until you easily find the guide that meets your needs.

The guide

The final page only presents the sections needed to start your system without falling into technicalities (we still recommend reading the comprehensive manual included in the package).

The system

Smart Pro - riempimento - 2 pompe senza gall - sonde.webp

Here you will see the reference illustration of your system

The diagram

schema Smart Pro e Pro X - Riempimento - No gall - sonde.webp

Here you will find the wiring diagram. Pay attention to this point, as it is the heart of the system startup.

C-MAX

This section will remind you to short-circuit C and Max if the system requires it. Pay close attention to this point, as many forget this step.

Dip Switch

Follow the guide of your system to understand which switches should be activated and which should be turned off.

Having arrived this far, most systems are already ready for ignition, but the quick guide also offers other details to check. We recommend following them to have an optimal and efficient system.

Diagnostics

It is recommended to always assess the CONDUCTIVITY status of the liquid

Trimmer Sensitivity Probes

This section explains how to adjust the sensitivity of the probes using the provided trimmer.

Motor Current Trimmer

This section explains how to adjust the minimum and maximum current trimmers associated with the pumps, as well as how to perform assisted calibration.

Dip Switch Display

Here you will see how to enable or disable the additional functions of your panel thanks to the positioning of the display switches.

Thank you

If you have followed the quick guide step by step, we are sure that your system will not hesitate to start and operate correctly. Everything you find is the result of years of experience in the industry, and the proposed solutions address the most common questions and errors that can occur during the installation of the panel.

Are you still experiencing issues with activation?

Write to us at the email: ufficiotecnico@Elentek.com
We will respond as soon as possible